Supaloft

Key Facts

  • Width (mm) – 370, 570
  • Thickness (mm) – 100, 150
  • Thermal Conductivity – 0.040 W/mK
  • Sound Absorption – NRC 1.00 @ 100mm
  • Made in the UK
  • Manufactured to ISO 9001 & 14001
  • Can be recycled
  • Vapour Open
  • Recycled

Supaloft

Soft-touch insulation that's safe and easy to install

The makers of Thermafleece have turned duvet and pillow technology into safe, sustainable and cost effective insulation for your loft.

Most of us are familiar with the warmth and comfort provided by polyester fibres, widely used to fill jackets, duvets and pillows.  Now Eden Renewable Innovations has taken this technology and using recycled polyester fibres made from recycled plastic bottles they have created long lasting and safe insulation for lofts.

Supaloft contains no harmful chemicals or binders and is completely safe to handle.  Converting plastic bottles into insulation helps divert many tonnes of waste plastic from landfill or incineration helping protect our environment.

Supaloft is long-lasting and easy to install. What’s more, energy savings mean the insulation pays for itself in just a few years.  Supaloft can be used to insulate between and over joists or simply laid on top of existing insulation to improve overall insulation performance.

Installing Thermafleece

Supaloft is harmless and can be installed without gloves or protective clothing, although we recommend you wear a dust mask in enclosed spaces such as lofts. Supaloft is not irritating to the skin, eyes or respiratory tract.

To retain the benefits of vapour permeability, Supaloft may be used in conjunction with a vapour permeable underlay. Protect the insulation from prolonged exposure to sunlight when unpacked and avoid wetting for extended periods, store under cover and clear of the ground.

Cutting Tips

Supaloft can be cut using a straight edge and a Stanley knife, or simply torn apart.

For more accurate cutting, tightly compress or clamp the insulation between two pieces of solid 15mm board. Overhang the fleece where you want to cut keeping the two board edges aligned. Saw cut the edge using a sharp, scalloped edged knife and keep the blade firm and square against both board edges throughout. Trim any fine remaining fibres with large scissors or shears.

  • Thermal Conductivity: 0.040 Wm-1K-1
  • Density: 13 kgm-3
  • Specific Heat Capacity: 1100 Jkg-1K-1
  • Vapour Resistivity: 5 MN·s·g–1m–1
  • Ignition Point: >500oC
  • Spread of Fire to BS 5803-4: Pass
  • Recoverability and thickness to EN 823: Pass
  • Dimensional stability to EN 1604: Pass
  • Short term water absorption to EN 1609 method A: Pass
  • GWP (Cradle to Gate): <5 kgCO2e
  • Recycled Content: >95%
  • Recyclable: Yes

Featured buildings

'Modulog' Shepherds Huts 'Modulog' Shepherds Huts
Apple Tree Farm House Apple Tree Farm House
Blacksail YHA Blacksail YHA
Bodleian Library Bodleian Library
Ceridwen Centre Eco-pod Ceridwen Centre Eco-pod
Edinburgh Castle Edinburgh Castle
Flitwick Mill Flitwick Mill
Mill Lane, East Sussex Mill Lane, East Sussex
Norfolk House Norfolk House
Portinscale Village Hall Portinscale Village Hall
Rise Hall Rise Hall
Scottish National Park Scottish National Park
Sunbeams Music Centre Sunbeams Music Centre
Sustainable Showroom at Mike Wye Associates Sustainable Showroom at Mike Wye Associates
Sweeney's Bothy Sweeney's Bothy
Design: The Space